Post-processor of RhinoCam, CopperCam, Kiri:moto,
Open the format setting of the post-processor and use a custom method to set the start and end commands of the G code and the layout of the G commands for the post-processor, which are all open for users to adjust.
As long as to set the CAM software post-processor to the commands that Bravoprodigy CNC is acceptable, and the Gcode can be transferred for usage.
The instructions which our machine can be compatible with are listed as follows.
G00 Rapid positioning
G01 Linear motion
G02 Arc insertion
G03 Arc insertion
G20 Imperial input
G21 Metric input
M30 End of program
F Feed Rate
S Spindle Speed
As long as to set the CAM software post-processor to the commands that Bravoprodigy CNC is acceptable, and the Gcode can be transferred for usage.
The instructions which our machine can be compatible with are listed as follows.
G00 Rapid positioning
G01 Linear motion
G02 Arc insertion
G03 Arc insertion
G20 Imperial input
G21 Metric input
M30 End of program
F Feed Rate
S Spindle Speed
